Menu
H steel mezzanine platform is also called steel platform, steel mezzanine , steel mezzanine floor,warehouse mezzanine floor, mezzanine platform and so on. It’s name is derived from the fact that is made of H steel.It’s columns and it’s main beams are made of H-shaped steel.
Usually,we use it to build an office, below is the dust-free workshop, enclose it with glass, and with a stair for going up and down. The load bearing capacity for each square can only be 300-500KG/㎡ if it only used for office purposes, because the heavier the load-bearing capacity, the larger the material used and the higher the cost.
If both the top and the bottom are used as warehouses to store goods.You can make an iron met to enclose it if there are valuable goods underneath.Make a guardrail on the second floor according to the height of the goods. The load bearing capacity for each square depends on the weight of the goods.The most common ones are 500kg/㎡， 800kg/㎡， 1000kg/㎡， 1200kg/㎡, 1500kg/㎡，2000kg/㎡ and 3000kg/㎡ and so on.
Just as we mentioned above the heavier the load-bearing capacity, the larger the material used and the higher the cost,and the heavier the material is the more difficult it is to install,and sometimes we also have to consider the load bearing capacity of the foudation. In any case, i think cost considerations come first, and what suits you is the best.
1.We suggest use the H steel material to made the h steel mezzanine when the load bearing capacity of the platform is over 800 kilograms per square meter.
2.When the span exceeds 4 meters you need to made the H steel mezzanine platform.
3.When you want to build multi-level floors we suggest you use the H steel material to made the H steel mezzanine platform.
This is the installation video from our site. No matter what size you need we can customized it. Choose us and trust us!Whatsapp : 18824537792 E-mail : [email protected].
Punches run the length of the hanging plate at standard intervals where the cross beams are connected, most of them are 50mm or 75mm pitch.
Steel coil through the rolling equipment to form the upright and beam, beam usually have P beam and interlock beam, upright usually have diamond hole and teardrop hole.
Through welding, the hanging plate and beam; upright and footplate are closely connected together, which effectively strengthens the stability of the rack structure.
Polish the product after welding, then use electrostatic powder spraying technology on the surface, and finally use the high-temperature baking process to ensure a smooth surface.
Finally came to the last step. After the production of the product is completed, we usually package the exported goods to avoid long-distance transportation damage and seawater erosion during shipping.
Here are some pictures of the on-site installation for H steel mezzanine platform.
